Vented Fill for 1-1/2" Hose - Angled Neck

Product Description

Angled Neck
Chrome Plated Bronze Cap
Black Polymer Body
Stainless Steel Bead Chain
Integral Tank Vent with Flame Arrestor and Anti Surge Valve
Deck Plate Key and O-Ring Included

Technical Information

For Hose Size: 1-1/2"
For Vent Hose: 5/8"
O.D. Flange: 3-3/8"
Mounting Hole Dia.: 2-1/8"
Neck Length: 2-7/16"
Screw Size: #8

Ordering Information

Marked For	Dealer Pkg. 5 Pcs. 1 Pc. per Card	OEM Bulk Pkg. 25 Pcs.	Ship Wt. Carton Lbs. DP/OEM Bulk
Gas	0540DPGCHR*	0540G00CHR*	4.2/15.7
Diesel	0540DPDCHR**	0540D00CHR**	4.2/15.1
Water	0540DPWCHR	0540W00CHR	4.2/15.1

Instructions & Resources

0540 Installation Instructions

Product Notes

* NOTE: These Fills Meet the Requirements of U.S.C.G. Safety Standards, January 31, 1977, for Gasoline Fuel Systems, 33 CFR 183. Fills shown on this page DO NOT meet the requirements for 40 CFR 1060 sub part B Emissions Standards and Related Requirements.

** Note: Consider the use of the Mounting Ring (Fig. 0540DPRBLK) below for all installations.